AutoDiscovery

AutoDiscovery Introduction

SOAP functionality implemented within Zend Framework is intended to make all steps required for SOAP communications more simple.

SOAP is language independent protocol. So it may be used not only for PHP-to-PHP communications.

There are three configurations for SOAP applications where Zend Framework may be utilized:

  • SOAP server PHP application <—> SOAP client PHP application
  • SOAP server non-PHP application <—> SOAP client PHP application
  • SOAP server PHP application <—> SOAP client non-PHP application

We always have to know, which functionality is provided by SOAP server to operate with it. WSDL is used to describe network service API in details.

WSDL language is complex enough (see http://www.w3.org/TR/wsdl for the details). So it’s difficult to prepare correct WSDL description.

Another problem is synchronizing changes in network service API with already existing WSDL.

Both these problem may be solved by WSDL autogeneration. A prerequisite for this is a SOAP server autodiscovery. It constructs object similar to object used in SOAP server application, extracts necessary information and generates correct WSDL using this information.

There are two ways for using Zend Framework for SOAP server application:

  • Use separated class.
  • Use set of functions.

Both methods are supported by Zend Framework Autodiscovery functionality.

The Zend\Soap\AutoDiscover class also supports datatypes mapping from PHP to XSD types.

Here is an example of common usage of the autodiscovery functionality. The generate() function generates the WSDL object and in conjunction with toXml() function you can posts it to the browser.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
class MySoapServerClass {
...
}

$autodiscover = new Zend\Soap\AutoDiscover();
$autodiscover->setClass('MySoapServerClass')
             ->setUri('http://localhost/server.php')
             ->setServiceName('MySoapService');
$wsdl = $autodiscover->generate();
echo $wsdl->toXml();
$wsdl->dump("/path/to/file.wsdl");
$dom = $wsdl->toDomDocument();

Note

Zend\Soap\Autodiscover is not a Soap Server

It is very important to note, that the class Zend\Soap\AutoDiscover does not act as a SOAP Server on its own.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
if (isset($_GET['wsdl'])) {
    $autodiscover = new Zend\Soap\AutoDiscover();
    $autodiscover->setClass('HelloWorldService')
                 ->setUri('http://example.com/soap.php');
    echo $autodiscover->toXml();
} else {
    // pointing to the current file here
    $soap = new Zend\Soap\Server("http://example.com/soap.php?wsdl");
    $soap->setClass('HelloWorldService');
    $soap->handle();
}

Class autodiscovering

If a class is used to provide SOAP server functionality, then the same class should be provided to Zend\Soap\AutoDiscover for WSDL generation:

1
2
3
4
5
$autodiscover = new Zend\Soap\AutoDiscover();
$autodiscover->setClass('My_SoapServer_Class')
             ->setUri('http://localhost/server.php')
             ->setServiceName('MySoapService');
$wsdl = $autodiscover->generate();

The following rules are used while WSDL generation:

  • Generated WSDL describes an RPC/Encoded style Web Service. If you want to use a document/literal server use the setBindingStyle() and setOperationBodyStyle() methods.
  • Class name is used as a name of the Web Service being described unless setServiceName() is used explicitly to set the name. When only functions are used for generation the service name has to be set explicitly or an exception is thrown during generation of the WSDL document.
  • You can set the endpoint of the actual SOAP Server via the setUri() method. This is a required option.

It’s also used as a target namespace for all service related names (including described complex types).

  • Class methods are joined into one Port Type. $serviceName . ‘Port’ is used as Port Type name.
  • Each class method/function is registered as a corresponding port operation.
  • Only the “longest” available method prototype is used for generation of the WSDL.
  • WSDL autodiscover utilizes the PHP docblocks provided by the developer to determine the parameter and return types. In fact, for scalar types, this is the only way to determine the parameter types, and for return types, this is the only way to determine them. That means, providing correct and fully detailed docblocks is not only best practice, but is required for discovered class.

Functions autodiscovering

If set of functions are used to provide SOAP server functionality, then the same set should be provided to Zend\Soap\AutoDiscovery for WSDL generation:

1
2
3
4
5
6
$autodiscover = new Zend\Soap\AutoDiscover();
$autodiscover->addFunction('function1');
$autodiscover->addFunction('function2');
$autodiscover->addFunction('function3');
...
$wsdl = $autodiscover->generate();

The same rules apply to generation as described in the class autodiscover section above.

Autodiscovering Datatypes

Input/output datatypes are converted into network service types using the following mapping:

  • PHP strings <-> xsd:string.
  • PHP integers <-> xsd:int.
  • PHP floats and doubles <-> xsd:float.
  • PHP booleans <-> xsd:boolean.
  • PHP arrays <-> soap-enc:Array.
  • PHP object <-> xsd:struct.
  • PHP class <-> based on complex type strategy (See: this section) [1].
  • type[] or object[] (ie. int[]) <-> based on complex type strategy
  • PHP void <-> empty type.
  • If type is not matched to any of these types by some reason, then xsd:anyType is used.

Where xsd: is “http://www.w3.org/2001/XMLSchema” namespace, soap-enc: is a “http://schemas.xmlsoap.org/soap/encoding/” namespace, tns: is a “target namespace” for a service.

WSDL Binding Styles

WSDL offers different transport mechanisms and styles. This affects the soap:binding and soap:body tags within the Binding section of WSDL. Different clients have different requirements as to what options really work. Therefore you can set the styles before you call any setClass or addFunction method on the AutoDiscover class.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
$autodiscover = new Zend\Soap\AutoDiscover();
// Default is 'use' => 'encoded' and
// 'encodingStyle' => 'http://schemas.xmlsoap.org/soap/encoding/'
$autodiscover->setOperationBodyStyle(
                    array('use' => 'literal',
                          'namespace' => 'http://framework.zend.com')
                );

// Default is 'style' => 'rpc' and
// 'transport' => 'http://schemas.xmlsoap.org/soap/http'
$autodiscover->setBindingStyle(
                    array('style' => 'document',
                          'transport' => 'http://framework.zend.com')
                );
...
$autodiscover->addFunction('myfunc1');
$wsdl = $autodiscover->generate();
[1]Zend\Soap\AutoDiscover will be created with the Zend\Soap\Wsdl\ComplexTypeStrategy\DefaultComplexType class as detection algorithm for complex types. The first parameter of the AutoDiscover constructor takes any complex type strategy implementing Zend\Soap\Wsdl\ComplexTypeStrategy\ComplexTypeStrategyInterface or a string with the name of the class. See the Zend\Soap\Wsdl manual on adding complex types for more information.